|
|
|
|
|
|
|
|
DAVEY Electric Transfer Pump - XF Series
Applications
- Irrigation
- Aquaculture
- Water transfer
- Washing systems
- Hydroponics
Features
- MADE IN AUSTRALIA
- Closed vane impellers with full length 'D' drive for positive robust impeller drive.
- Motor and pump are designed for frequent starts providing a long and reliable working life.
- Pump shaft and casing (on twin impeller models) are manufactured from quality corrosion resistant stainless steel.
- Every pump is performance and pressure tested in our factory to ensure quality and reliability.
|
|
|
|
|
|
|
|
|
|
DAVEY Electric Transfer Pump - HP45-05
Applications
- Domestic water supply
- Washing systems
- Irrigation
- Water transfer
- Pressure boosting
Features
- MADE IN AUSTRALIA
- Corrosion resistant 304 stainless steel pump shaft and casing for long service life.
- High quality mechanical shaft seal for long life and reliability.
- Patented floating impeller neck rings provide:
- High efficiency
- Quieter pump operation
- The Davey manufactured TEFC motor has an IP55 enclosure providing:
- Excellent corrosion resistance
- High levels of resistance to dust and rain
- Ability to operate reliably in high ambient temperatures
- Permanently split capacitor motor design for:
- Reliable starting even in low voltage circumstances
- Superior frequent starting performance
- Motor protected against both high operating temperatures and high current by a built in, automatically resetting thermal overload.
- All models come with a 2 metre power lead fitted with 3 pin Australian plug.
- Double contact C3-HTG sealed motor bearings for quieter running and longer life.
|
|
|
|
|
|
|
|
|
|
DAVEY Dynaprime X201 Self Priming Pump
Applications
- Water supply
- Water transfer
- Septic tank emptying
- Draining of water tanks
- Sump draining
Features
- MADE IN AUSTRALIA
- Davey manufactured TEFC motor with IP55 enclosure, corrosion resistant and excludes dust and dirt, and is designed for frequent starts
- Single stage open vane impeller will pump clean or grey water with some small fibres or soft solids in suspension
|
|
|
|
|
|
|
|
|
|
DAVEY Dynaflo 6000 Series Models - 6200/6210
Applications
- Water supply
- Water transfer
- Hosing down - dairies, factory floors etc.
- Tank filling
- Sprinkler supply
- Garden reticulation
Features
- High TEFC - IP rating for long term protection against vermin, dust and water.
- Manufactured from quality corrosion resistant materials.
- Proven, robust pump design for long life.
- Super quiet operation.
- Metal hoop strengthened inlet and outlet ports.
- Quick and easy installation.
- Low maintenance.
- Easy to service if required.
- Corrosion resistant motor mounting feel.
- Oring sealed hand tightened printing and drain plugs for easy operation.
|
|
|
|
|
|
|
|
|
|
DAVEY Dynaflo 6000 Series Models - 6220/6230
Applications
- Water supply
- Water transfer
- Hosing down - dairies, factory floors etc.
- Tank filling
- Sprinkler supply
- Garden reticulation
Features
- Every pump is performance and pressure tested to ensure quality and reliability.
- Cast iron pump casing with baked polyester finish inside & outside for long life.
- Oring sealed hand tightened priming plugs for easy operation.
- Proven, robust pump design for long life.
- Davey manufactured motor with IP56-TEFC, 2 pole motor is corrosion resistant for long term protection against vermin, dust and water.
- Motor and pump are designed for frequent starts providing a long and reliable working life.
- In-built thermal overload protection with automatic reset in all single phase models for long term motor protection.
- Double contact seal, C3, high temperature greased bearings for long life and smooth running.
- 2m power lead with 15amp Australian three pin plug fitted to all single phase models.
- Single phase 62201S model is suitable for both 220-240 volt and 440-480 volt single phase supply.
- Corrosion resistant motor mounting feet for long life.
|
|
|
|
|
|
|
|
|
|
DAVEY Dynaflo SS Series - 6220ss/6230ss
Applications
- Water supply
- Water transfer
- Hosing down - dairies, factory floors etc.
- Tank filling
- Sprinkler supply
- Garden reticulation
Features
- Every pump is performance and pressure tested in our factory to ensure quality and reliability.
- Cast 316SS pump casing with silicon carbide hard faced mechanical seal for long life.
- Oring sealed hand tightened priming plugs for easy operation.
- Proven, robust pump design for long life.
- 316 stainless steel pump shaft for longer life in aggressive water.
- Davey manufactured motor with IP56-TEFC, 2 pole motor is corrosion resistant for long term protection against vermin, dust and water.
- Motor and pump are designed for frequent starts providing a long and reliable working life.
- In-built thermal overload protection with automatic reset in all single phase models for long term motor protection.
- Double contact seal, C3, high temperature greased bearings for long life and smooth running.
- 2m power lead with 15amp Australian three pin plug fitted to all single phase models.
- Single phase 62201SS model is suitable for both 220-240 volt and 440-480 volt single phase supply.
- Corrosion resistant motor mounting feet for long life.
|
|
|
|
|
|
|
|
|
|
ONGA Riva-flo CF Range Cast Iron Centrifugal Pumps
The Riva-flo CF range of cast iron centrifugal pumps have been designed and manufactured for cost-effective general purpose water transfer duties.
Their cast iron construction and heavy duty TEFC motor make for a solid, dependable pump.
The impeller is cast and machined from bronze, while the motor shaft is constructed of high grade stainless steel. The Riva-flo CF range has a suction port in line with the impeller eye for better performance when the water source is above the pump.
Features
- Cast iron construction - Heavy duty casing for strength
- Stainless steel shaft - Corrosion protection
- TEFC motors - inbuilt thermal protection - Durable drive source
- Offset suction port (PF models) - Aids suction lift and priming
|
|
|
|
|
