• Domestic fountains or water falls
• Sump emptying
• Emergency flood relief
• Water transfer
• Pumping in partially submerged applications

• Open impeller, semi vortex, centrifugal design is able to pump small soft solids in suspension and is less susceptible to blockage.
• Hard face silicon carbide / ceramic mechanical shaft seal in oil bath for added motor protection and long service life.
• Sand slinger lip seal for added protection and a long service life.
• Corrosion resistant 304 stainless steel fasterners for long service life and attractive, lasting appearance.
• Double case with full discharge flow past internal motor shell is able to operate in partially submerged installations and has bettermotor cooling for longer life.
• Automatic resetting thermal overload protects pump from overloading.

• Dirty water pumping
• Sump emptying
• Septic effluent water disposal
• Pumping of waste water with small soft solids in suspension
• Pumping in partially submerged applications

• Open impeller, semi vortex, centrifugal design is able to pump small soft solids in suspension and is less susceptible to blockage.
• Double mechanical shaft seal in oil bath with hard faced silicon carbide / ceramic seal on pump side for added motor protection and long service life.
• Sand slinger lip seal for added protection and a long and reliable service life.
• Corrosion resistant 304 stainless steel outer case and strainer for long service life and an attractive, lasting appearance.
• Double case with full discharge flow past internal motor shell is able to operate in partially submerged installations with better motor cooling for longer life.
• Automatic resetting thermal overload to protect motor from overloading.

• Grey water pumping
• Sump emptying
• Septic effluent water disposal
• Pumping of light slurries and factory waste
• Water transfer

• Open impeller vortex, centrifugal design is able to pump small soft solids in suspension and is less susceptible to blockage.
• Double mechanical shaft seal in oil bath with hard faced silicon carbide / ceramic seal on pump side for added motor protection and long service life.(D15VA has a single seal).
• Sand slinger lip seal for added protection and a long and reliable service life.
• Corrosion resistant 304 stainless steel shaft, motor shell and fasterners for long service life and an attractive, lasting appearance.
• Preset length float switch fitted for unattended operation
• HO7RNF oil resistant leads, 10 metres long with 3 pin power plug
• Easy to connect to power supply
• Longer life in dirty water

• Grey water pumping
• Sump emptying
• Septic effluent water disposal
• Pumping of light slurries and factory waste
• Water transfer

• Open impeller vortex, centrifugal design is able to pump light slurries and water containing soft solids in suspension.
• Double mechanical shaft seal in oil bath with hard faced silicon carbide / ceramic seal on pump side for added motor protection and long service life.
• Sand slinger lip seal for added protection and a long and reliable service life.
• Corrosion resistant 304 stainless steel shaft, motor shell and fasterners for long service life and an attractive, lasting appearance.
• D75VA model fitted with automatic float switch with a preset float length for unattended operation
• Adaptable to Davey SR80 slide rail kits for easier installation & removal for service
• Corrosive resistant 304 stainless steel motor case for long service life and an attractive, lasting appearance
• Automatic resetting thermal overload to protect against overloading
• Mounting base fitted for a firm and stable positioning during installation and operation
• HO7RNF oil resistant leads, 10 metres long with bared wire lead ends for easy connection to power supply terminations and longer life in dirty water.

• Dewatering of cellars, garages, ditches, pits & ponds
• Pumping clean or slightly dirty water
• Sump emptying
• Decorative water features
• Suitable Fluids : Sewage or "grey water" of neutral pH containing up to 10% of small soft organic solids (<10mm OD). Some accelerated wear should be expected while pumping hard solids in suspension.

• Open impeller, centrifugal design
• Able to pump small soft solids in suspension
• Less susceptible to blockage
• Double mechanical shaft seal in oil bath with hard faced silicon carbide / ceramic seal on pump side (D10 & D15 models have single seals)
• Added motor protection
• Long service life
• Sand slinger lip seal
• Added protection
• Long service life
• Corrosive resistant 304 stainless steel motor shell and strainer
• Long service life
• Attractive, lasting appearance
• HO7RNF oil resistant leads, 10 metres long with 3 pin power plug
• Easy to connect to power supply
• Longer life in dirty water
• High quality paint finish
• Long service life
• Attractive lasting appearance
• Automatic resetting thermal overload
• Protected against overloading.

• Lawn & garden irrigation
• Sump emptying to higher heads
• Treated effluent disposal
• Water transfer from wells
• Model D42A/B specially designed for non potable rainwater applications

• Double mechanical seal, one in oil bath on motor and extra mechanical seal on pump
• Superior reliability
• Long service life
• Corrosion resistant 304 stainless steel shaft, motor shell and fasteners
• Long service life
• D42A/B has cast 316 stainless steel motor caps and super tough engineered thermo plastic pump casing
• Outstanding corrosion resistance
• Long life
• Centrifugal multistage twin impeller design
• Higher pressures & increased efficiency
• Closed vane impellers with long engagement “D” drives
• Positive operation
• Long service life
• D42A & D42M have labyrinth impeller neck rings
• Maintain pump performance
• Less susceptible to wear
• D42A/B has patented independently floating neck rings
• Outstanding pump performance
• Long pump life
• Corrosion resistant hard wearing polycarbonate impellers
• Long service life
• Corrosion resistant stainless steel fine mesh suction strainer with large surface area
• Prevents blockages of the pump by solids
• In-built automatic thermal overload
• Protects the motor in the event of blockage or voltage supply problems
• HO7RNF oil resistant leads, 10 metres long with 3 pin power plug
• Easy to connect to power supply
• Longer life in dirty water

• Sump emptying
• Septic water disposal
• Water transfer
• Pumping of neutral, non-aggressive factory waste water

• Corrosion resistant 304 stainless steel shaft, motor shell and fasteners for long service life and attractive, lasting appearance.
• Open impeller, centrifugal design suitable for pumping soft solids in suspension, less susceptible to blockage and capable of higher heads / pressure.
• Double mechanical shaft seal in oil bath with hard faced silicon carbide / ceramic seal on pump side for added motor protection and long service life.

The Onga VIP range is designed for dewatering applications such as disposal of rainwater from garages, basements, cellars, drainage pits and decorative fountains. These pumps can pass solids up to 6mm in size, and are capable of draining water down to a level of 20mm.

• Polypropylene body - Corrosion free
• Dual lip seal in Nitrile NBR 70 with an oil chamber for lubrication - Efficient and effective seal in clean water applications
• Impellers are from injection-moulded Noryl - Engineered plastic for strength and corrosion protection
• Heavy duty H05RN-F power cable - Durable in tough environments
• Auto-resetting thermal motor overload protection - Protected against abnormal conditions
• Stainless steel shaft with ceramic coating for continuous use - Efficient low drag with built in toughness

The Onga VIPvort range is designed to pump grey water with soft solids up to 25mm diameter. Primarily designed for transfer of wastewater from domestic applications, dewatering and drainage pits. The Onga VIPvort is capable of draining to a water level of 25mm.

• Polypropylene body - Corrosion free
• Dual lip seal in Nitrile NBR 70 with an oil chamber for lubrication - Efficient and effective seal in clean water applications
• Impellers are from injection-moulded Noryl - Engineered plastic for strength and corrosion protection
• Heavy duty H05RN-F power cable - Durable in tough environments
• Auto-resetting thermal motor overload protection - Protected against abnormal conditions
• Stainless steel shaft with ceramic coating for continuous use - Efficient low drag with built in toughness

The Onga Biox is a submersible vortex pump that includes both a lip seal with sand guard and a carbon-ceramic mechanical seal.

The Onga Drenox range is constructed entirely of 304 grade stainless steel, including a cast stainless steel impeller. This design includes a heat exchange chamber to cool the motor for long periods of un-submerged operation, and an oil chamber for lubrication of the seal.

The Onga Minivort Range are cast iron submersible vortex pumps for high flow pumping in large water disposal applications. They are constructed from cast iron with an anti-corrosive coating and feature a carbon-ceramic mechanical seal and nitrile lip seal. The Minivort is supplied with a float switch on a 10 metre cable and a control box. The PSC motor has thermal overload protection and self-lubricating ball bearings to ensure longevity.