|
|
|
|
|
|
|
|
DAVEY Dynaflo 6000 Series Models - 6200/6210 - Single Phase
Applications
- Water supply
- Water transfer
- Hosing down - dairies, factory floors etc.
- Tank filling
- Sprinkler supply
- Garden reticulation
Features
- High TEFC - IP rating for long term protection against vermin, dust and water.
- Manufactured from quality corrosion resistant materials.
- Proven, robust pump design for long life.
- Super quiet operation.
- Metal hoop strengthened inlet and outlet ports.
- Quick and easy installation.
- Low maintenance.
- Easy to service if required.
- Corrosion resistant motor mounting feel.
- Oring sealed hand tightened printing and drain plugs for easy operation.
|
|
|
|
|
|
|
|
|
|
DAVEY Dynaflo 6000 Series Models - 6220/6230 - 3-phase
Applications
- Water supply
- Water transfer
- Hosing down - dairies, factory floors etc.
- Tank filling
- Sprinkler supply
- Garden reticulation
Features
- Every pump is performance and pressure tested to ensure quality and reliability.
- Cast iron pump casing with baked polyester finish inside & outside for long life.
- Oring sealed hand tightened priming plugs for easy operation.
- Proven, robust pump design for long life.
- Davey manufactured motor with IP56-TEFC, 2 pole motor is corrosion resistant for long term protection against vermin, dust and water.
- Motor and pump are designed for frequent starts providing a long and reliable working life.
- In-built thermal overload protection with automatic reset in all single phase models for long term motor protection.
- Double contact seal, C3, high temperature greased bearings for long life and smooth running.
- 2m power lead with 15amp Australian three pin plug fitted to all single phase models.
- Single phase 62201S model is suitable for both 220-240 volt and 440-480 volt single phase supply.
- Corrosion resistant motor mounting feet for long life.
|
|
|
|
|
|
|
|
|
|
ONGA Sta-Rite Signature 2000
The Sta-Rite Signature 2000 range continues to set the best practice standard for pumps for borehole use. They incorporate several features that set them apart for use even in rough or aggressive water.
The floating impeller stack design allows individual impellers to move vertically which prevents small solids from locking up the pump. In addition, the impeller bearings utilise a ceramic material to grind down sand or other small particles that are trapped in the pump, allowing them to pass through. The pump is far less susceptible to clogging up and locking, meaning that the Sta-Rite Signature 2000 keeps delivering water long after other pumps have given up.
Features
- Large hexagonal shaft - Transmits power without wear or flex
- Heavy gauge outer shell - Strong, rigid and long lasting
- Harder than sand ceramic wear surface - Reduces problems running in sandy or abrasive water
- Floating impeller design - Reduces sand lock up problems, longer motor life, trouble free operation
- Discharge housing eliminates unscrewing at start - Easier installation
|
|
|
|
|
|
|
|
|
|
ONGA Hi-Flo Moulded Centrifugal Pumps
Pentair Water is a leader in the use of injection moulding for pump components. This is evident in the Onga 140 series pumps, which couples hydraulic design and corrosion-resistant high grade moulded materials. This provides a general-purpose pump that is suitable for high head water transfer, tank filling, irrigation and circulation duties. Flows of up to 500 litres per minute or heads of over 40 metres are achievable from this range.
Features
- Award winning Hi-Flo impeller - High pressure, high flow and great efficiency with lower operating cost
- Moulded pump casing - Corrosion resistant and lightweight
- Close coupled to a TEFC motor - Resistant to water ingress, vermin proof, and high efficiency
- Single or three phase - This option available for 143/183
- Inbuilt thermal overload - Protects motor from overheating through pump jamming or similar
|
|
|
|
|
|
|
|
|
|
Lowara CEAM 210/5 Gardenmaster Single Phase Bore Pump
A stainless steel single-stage centrifugal pump with carbon-ceramic mechanical seal.
Features
- Power: 1.85kW
- Delivery: 18m³/hour
- Head: 29m
- Pressure: 290kPa
|
|
|
|
|
|
